|
|
Retrofit
• Rebuild • Remanufacture • Service
Gleason Machines
We offer subject to prior sale:
Shop Number: 2607P
One Model # 3 Gleason “Two-Tool” Straight Bevel Gear Generator
for producing Gears or Pinions up to 4.5” (112mm) Pitch Diameter,
0.875” (22mm) Face Width, 12 DP (2 Module)
Serial Number: 15826
Gleason machine comes Equipped with these Features:
• Chucking Arrangement
•
One Set of Tool Setting
Gauges
•
One Cutter Length Gauge
•
One Segment Arm
•
One Segment
•
Assorted Feed Cams and
Generating Cams
•
Change Gears
•
Gear Cabinet to House Accessories
•
One Set-Up of Index / Auxiliary
Plates
•
Self Contained Coolant
System
•
Full Complement of Electrics
(Motor / Controls)
•
Assorted Guards, Covers,
Hoses, etc.
•
Operator’s Manual,
Parts List, Electrical Diagram |
|
| Gleason Machine #3 |
We offer subject to prior sale:
Shop Number: 3119
Gleason 503 Hypoid Gear Lapping Machine
Serial Number: 622214
This Gleason machines function is for lapping hypoid gears and spiral bevel gears mostly
used for automotive. For 90 degree shaft angle requirement up
to 10 1⁄2” diameter. Faster and accurate lapping of
the tooth surface is the result of a swing pinion cone.
Gleason machine comes Equipped with these Features:
• (SPC) Swing Pinion Cone Lapping Action
• Automatic Backlash Control
• Power Traverse of Pinion Head
• Hydraulic Chucking Attachments
• Hydraulic Brake
• Main Drive, Hydraulic, Lapping Compound Pump & Oscillating
Drive Motors & Electric Controls
Gleason machine Specifications:
| • Maximum Gear Diameter.................................................. |
10 1⁄2” |
| • Maximum Pinion Diameter................................................ |
6” |
| • Offset of Gear Spindle above or below
Center of Pinion... |
3.75” max. |
| Pinion Spindle (#39 Taper) |
|
| • Diameter of Taper Hole at Large End................................. |
3-29/32” |
| • Taper per foot................................................................... |
39/64” |
| • Depth of Taper................................................................. |
3” |
| • Diameter of Hole through Spindle..................................... |
2 1⁄2” |
| Gear Spindle (#14 Taper) |
|
| • Diameter of Taper Hole at Large End............................... |
2-19/64” |
| • Taper per Foot................................................................. |
1/2” |
| • Depth of Taper................................................................. |
3” |
| • Diameter of Hole through Spindle..................................... |
2-3/16” |
| |
|
| • Floor Space Required...................................................... |
71” x 64” x 67” |
| • Weight Approximately....................................................... |
9,250 lbs. |
Gleason Machine #503 |
Note: The descriptions of the Gleason machines is based on the best information available
to Dixie Machinery, Inc. We make no guarantees, warranties, or
representation, expressed or implied, as to quantity, kind, character,
quality, weight, size, or description of any of the property, or its
fitness for any use or purpose. No claim will be considered for
allowance or adjustment or for rescission of the sale based upon failure
of the property to correspond with the standard expected; this is not
a sale by sample. These Gleason machines are subject to prior sale and may be
removed from availability without any notice. This is not an offer
of sale. For an official Gleason machine quote, please contact us. |
| To view additional Gleason machines available at Dixie Machinery Inc. please follow the quench presses link. |
|